How to add a Laundry Room Table – One Room Challenge Week 5

My One Room Challenge Laundry Room Renovation is just about finished – welcome to Week 5! I am so grateful to Kirkland’s for sponsoring this project, they have the most amazing laundry room pieces – check those out here!

 

Make sure to check out the One Room Challenge Blog to see all the updates of the designers participating – their feeds are so inspiring.

Here is a recap of my 6 week outline:

Week One – OrigInal Room Reveal (read here)
Week Two – Wood Ceiling (READ HERE)
Week Three – Wallpaper and Cupboards (read here)
Week Four – Floating Shelves (read here)
Week Five – Drying Racks and Folding Table
Week Six – Decorations and Reveal
This post contains affiliate links to help you navigate to products I have used and am showcasing.

It was now time for me to build a table to cover the washer and dryer to fold my clothes on. My space is limited and I needed all the usable area I could get. This ended up being super easy and very effective for me.

Step One – Shop

I wanted butcher block, but it was out of my price range. You can build a butchers block board, but in the end I decided to use 1×8 pine boards instead.

I measured a 66 inch length and a 30 inch depth in my area. This required four 1×8 boards at 6 feet long and one 1×4 board (this is for the back edge of the folding table).

You can have Home Depot cut them for you as well.

Step Two – Cut and Mount

Cut each of your boards to the length you need. You will then add pocket holes to 3 of the 1×8 boards (read how to do that here).

Attach your boards together, using wood glue and pocket hole screws size 1 1/4 inch. Use clamps to make sure your boards are fitting snug. I also used extra weight on the boards as I attached them together to make sure they were flat when they were screwed together.

You will then add the 1×4 board to the back of the boards. You can use screws right into the back since noone will see these.

Step Three – Sand

Sand down your folding table. I used my Tacklife sander that is from Amazon ($25!). I actually sanded the 1×8 boards first before I mounted the 1×4 board. Additionally I had sanded the 1×4 board seperately. You can do what works for you.

Step Four – Stain

Add the stain of your choice. I used Old Barn Living Weathered One Step Stain – it’s one of my favorites and matched the other shelving in the room. I used 2 coats and then added a top coat.

Step Five – Add Braces

You will lay the folding table onto 2 braces. These are 2×3 boards that are mounted to the wall into the studs. Measure where your studs are, then mark that spacing onto the board and pre-drill your 3 1/2 inch screws into them.

Use a level to mount these into the wall. Make sure they are level!!

Step Six – Add Table

You will gently slide your table onto the 2×3 boards. We added a 1×10 board underneath our table for stability because we didn’t want it sitting on top of the washer and dryer.

Add screws or brad nails into the sides of the table and into the 2×3 boards. Then you are all finished!!

Next week I will showcasing all of the amazing pieces I have picked out from Kirkland’s to finalize this space.  I can’t wait to share it with you!

Do It Yourself Bracket Shelf

Do It Yourself Bracket Shelf

Recently I wanted to create a super easy shelf with inexpensive materials – wood and brackets. Let’s see what I came up with!

Continue reading “Do It Yourself Bracket Shelf”

One Room Challenge – Farmhouse Shutters

  One Room Challenge – Week Three

thumbnail_IMG_7529

Farmhouse Shutters

IMG_8884

So, the One Room Challenge Reveal is in TWO DAYS and I haven’t shared my updates!  So I am going to share my farmhouse shutters today, my blinds tomorrow and my reveal on Thursday – here we go!  As always, check out the other amazing ladies here who are participating on the Spring 2018 One Room Challenge with me!

Here’s my 6 week outline:

Project One – Shiplap COST $92.00   Read all about that project here

Project Two – Window Valences COST $45.00   Read all about that project here

Project Three – Custom Shutters COST $15.00

Project Four – Blinds

Project Five – Decorating

 

DIY VIDEO TUTORIAL 

Here is my 60 second video tutorial on how to make the farmhouse shutters on your own.  Then follow along for all the extra details below!

 

Continue reading “One Room Challenge – Farmhouse Shutters”

Do It Yourself Faux Brick Wall

img_4611.png

img_4630.jpg

 

We hung monkey bars from my daughters ceiling, not even thinking that the wall could be a casualty of this creative idea.  Needless to say, after a year or so – it happened.  Someone’s foot went through the wall:

IMG_3912

I knew it needed to be fixed, but I also wanted it to be stronger than before so it wouldn’t happen again.  I have always wanted a faux brick wall and figured this was a good chance to try it out.  Follow along with our 60 second DIY Tutorial to watch the transformation, then check out all the details below!

 

Continue reading “Do It Yourself Faux Brick Wall”

Do It Yourself Wood Tray

img_4276-e1517616705186.png

IMG_4245

Having a wood tray around the house is a MUST!  I use them in my bathroom for storage, serving drinks on, delivering breakfast in bed or adding decor for my living room.  Want to make one?  Check out my 60 second DIY Tutorial and then follow along to learn how!

Continue reading “Do It Yourself Wood Tray”

Do It Yourself Plumbers Pipe Towel Rack

img_3908-e1517601863919.png

img_0821.jpg

 

A client asked us to create a towel rack for her using plumbers pipe.  It was a super simple project and paired perfectly with the Plumbers Pipe Toilet Paper Holder that we additionally built them (click on title to see that blog post).

IMG_0823

Here is our 60 second video tutorial of the project, with lots of details following!

 

Continue reading “Do It Yourself Plumbers Pipe Towel Rack”