The DIY journey of a California citygirl and a Montana farmboy

Do It Yourself – Farmhouse Sign

Make this sign in 7 simple steps, come join me!

 

DIY Farmhouse Sign

 

Ever since I started documenting my home decor journey I have been crushin on all these farmhouse signs.  You can pay to get one made, and often they aren’t cheap.  But if you don’t have the time and you do have the money – go for it!  If you want to try and make one yourself, check out this process that is SUPER easy and SUPER inexpensive (under $20!!!).  The only downside?  It does take your time.  But if you turn on some tunes or your favorite book and get to work, you mind find out how much you enjoy this kind of thing.

Check out my 60 second DIY Farmhouse Sign tutorial and then follow along for all the details!

 

 

Supplies Needed:

  • 1×10 wood board: 4-8 feet long, depending on how many letters you are using
  • Stain (I like Minwax Provincial or Walnut)
  • White Paint (I use Behr Paint and Primer)
  • Paint and staining brush
  • Rags
  • Vaseline
  • Modge Podge
  • Mirror image prints
  • Frosting knife (or any tool with a rounded edge)
  • Corner brackets (optional)

 

img_0171.jpg

 

Step One – Stain Your Wood

I chose not to sand down my piece of wood because I wanted it rustic.  Feel free to sand your edges before staining if you would like them softer.   Grab your stain, darker is better.  It will show through the chippy paint areas.  I added Weathered Oak first, let dry, then add Provincial around the edges for some darker spots.  This isn’t necessary.

P.S. Forgive my grainy photos!  I only video taped this DIY and had to take stills from the movie!

 

IMG_0137

 

Step Two – Add Vaseline

Lets learn how to achieve the chippy look.  I have a detailed blog post here on how to achieve the distressed look using wax as well.

Take your vaseline and rub it lightly onto the edges and corners of your board.  Miss some spots on purpose.  Then add some in sporadic spots on your board.   The more you use the more of the stain will show through for your outcome.

 

img_0142.png

img_0143.png

 

Step Three – Paint Your Wood

Add a layer of white paint (or any color your prefer) to your board.  It doesn’t have to be super covered well, just “good enough.”  I use Behr Paint and Primer – I love it for the chippy look!  Let fully dry before the next step.

 

img_0144.png

IMG_1192

IMG_0145

 

Step Four – Print & Cut Your Words

This part is a little tricky if you do not know how to print mirror image.  Depending on the computer you have, it can be different for each.  Here is a link to teach you:

How to print a mirror image

Type out your word and mess with the fonts.  I really like Bordeaux Roman Bold LET for my signs.  You can fit about 3 letters per sheet if you use the 800 size.   If you don’t have that font you can download it here.

 

IMG_0146

 

Make sure you fiddle with it on your board to make sure it fits before the next step, which is cutting the letters.  You will cut as close to the edge as possible, keeping letters connected if you can.  This helps the placement goes smoother.

 

IMG_0147

img_0148.png

 

Step Five – Glue Your Letters

You will dip your brush into the modge podge and gentle wipe ON THE INK SIDE of the first set of letters you are going to lay down.  Be gentle so you don’t rip your letters.  You have to take special care when laying them down because they are sticky.  You will only have a few seconds to move them around if you need before the glue thickens up.  I had a measuring tape to make sure the top and bottom spacing were the same.

Also make sure to get glue over the entire letter.  Every bit of ink must have glue on it to adhere well to the board.

 

IMG_0149IMG_0152IMG_0153

 

You will press the letters fully onto the board to make sure no bubbles are left behind.  Let dry completely according to directions before moving on to the next step.

 

IMG_0154IMG_0155

 

Step Six – Remove Paper

Here is the fun part!  Grab a rag and get it pretty wet.  Not dripping, but still really moist.  Gently press it onto all of your letters, one at a time.  This will start the process and help with removal.

 

IMG_0156IMG_0157

 

Once that is done, head back to the first letter.  You will gently and slowly rub the letter to remove the paper.  This will leave the ink on the board.  If you rub too much the ink will come off too.  If you do rub some ink off, just press it back in place.  It will dry fine.  It’s ok to have some ink rubbed off if you are going for a really rustic look like I was.  This process takes time, but is worth it.  It’s going to look amazing!

 

IMG_0158IMG_0159

 

Step Seven – Chip Your Paint

I like to use my frosting knife because it is round but not sharp.  You can use any like tool for this.  You will take the edge and start LIGHTLY scratching areas of your wood.  The edges and around letters are especially good spots.  You can also scrape off any extra paper you may have left that needs to be removed.  The more you scrape, the more chippy your board will be!

 

IMG_0161

IMG_0162

IMG_0163

 

 

I added metal brackets to my edges for a more complete look.  You can find these in the knob and drawer handle isle at Home Depot!  Spray paint the color you want and drill them on.

 

IMG_0169

IMG_0173IMG_0170

 

Your all done!  Such a fun sign for a great price point.  Let us know how yours turns out!

Love,

IMG_7271

 

 

One thought on “Do It Yourself – Farmhouse Sign

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Daily DIY Hacks

Best diy life hacks|Life hacks tips and tricks

THE SWEET LIFE

A lifestyle blog by Emma

My Rustic Retreat

Farmhouse, Family, and Fun

The Missionary Mama's Guide

Navigating the best and worst two years of your life

Kenya Keys

Join our quest to educate and empower students in rural Kenya

%d bloggers like this: